Modelling fracture propagation and failure in a rock pillar under mechanical and thermal loadings

查看全文 作　　者：Mikael [1]Rinne;Baotang [2]Shen;Tobias [3]Backers

机构地区：[1]Fracom Ltd., Kirkkonummi, Finland;[2]CSIRO Earth Science and Resource Engineering, Brisbane, Australia;[3]Geomecon GmbH, Potsdam, Germany

出　　处：《Journal of Rock Mechanics and Geotechnical Engineering》索引2013年第5卷第1期,共11页

基　　金：conducted within the context of the international DECOVALEX–2011 Project(DEmonstration of COupled models and their VALidation against EXperiments);POSIVA (Finnish Nuclear Waste Management Company) who supported the work;Swedish Nuclear Fuel and Waste Manage-ment Co. (SKB), Sweden 摘　　要：The spPillar Stability Experiment (APSE) was conducted to study the rock mass response in a heated rock pillar between two large boreholes. This paper summarizes the back calculations of the APSE using a two-dimensional (2D) fracture propagation code FRACOD. To be able to model all the loading phases of the APSE, including the thermal loading, the code was improved in several ways. A sequential excavation function was developed to model promptly the stepwise changing loading geometry. Prior to the mod-elling, short-term compressive strength test models were set up aiming to reproduce the stress-strain behaviour observed for the sp diorite in laboratory. These models simulate both the axial and lateral strains of radial-controlled laboratory tests. The volumetric strain was calculated from the simulations and compared with the laboratory results. The pillar models include vertical and horizontal 2D models from where the stress in the pillar wall was investigated. The vertical model assesses the stability of the experimental rock volume and suggests the resultant stress below the tunnel floor in the pillar area. The horizontal model considers cross-sections of the pillar between the two large boreholes. The horizontal model is used to simulate the evolution of the stress in the rock mass during the excavation of the boreholes and during and the heating phase to give an estimation of the spalling strength. The modelling results suggest that the excavation-induced stresses will cause slight fracturing in the pillar walls, if the strength of the APSE pillar is set to about 123 MPa. Fracture propagation driven by thermal loading leads to minor spalling. The thermal evolution, elastic behaviour and brittle failure observed in the experiment are well reflected by the models. 关键词：热负荷传播建模岩柱稳定性实验实验室试验几何模型模型模拟

相关文献

参考文献（17）
引证文献（7）
耦合文献（0）

参考文献(17)

引证文献(7)

互联网出版许可证新出网证(渝)字10号全国400电话 - 免长途话费

Modelling fracture propagation and failure in a rock pillar under mechanical and thermal loadings

参考文献(17)

引证文献(7)

用户提示