维普中文期刊产品整合服务

Surface Roughness and Roundness of Bearing Raceway Machined by Floating Abrasive Polishing and Their Effects on Bearing's Running Noise

查看全文 作　　者：PANG [1]Guibing;QI [1]Xuezhi;MA [1]Qinyi;ZHAO [1]Xiujun;WEN [2]Chunsheng;XU [3]Wenji;PENG [1]Yanping 高影响力作者 机构地区：[1]School of Mechanical Engineering and Automation, Dalian Polytechnic University;[2]Dalian Wazhou Precision Motor & Automobile Bearing Co.,ltd;[3]School of Mechanical Engineering, Dalian University of Technology高影响力机构 出　　处：《Chinese Journal of Mechanical Engineering》索引2014年第27卷第3期,共8页高影响力期刊 基　　金：Supported by National Natural Science Foundation of China(Grant No.51275062);Open Foundation of Tsinghua University State Key Laboratory of Tribology of China(Grant No.SKLTKF11B08) 摘　　要：As the two most important indexes of bearing raceway,surface roughness and roundness have significant influence on bearing noise.Some researchers have carried out studies in this field,however,reason and extent of the influence of raceway surface geometric characteristics on bearing running noise are not perfectly clear up to now.In this paper,the raceway of 6309 type bearing’s inner and outer ring is machined by floating abrasive polishing adopting soft abrasive pad.Surface roughness parameters,arithmetical mean deviation of the profile Ra,the point height of irregularities Rz,maximum height of the profile Rmax and roundness f of raceways,are measured before and after machining,and the change rules of the measured results are studied.The study results show that the floating abrasive polishing can reduce the surface geometric errors of bearing raceway evidently.The roundness error is reduced by 25%,Rmax value is reduced by 35.5%,Rz value is reduced by 22%and Ra value is reduced by 5%.By analyzing the change of the geometrical parameters and the shape difference of the raceway before and after machining,it is found that the floating abrasive polishing method can affect the roundness error mainly by modifying the local deviation of the raceway’s surface profile.Bearings with different raceway surface geometrical parameter value are assembled and the running noise is tested.The test results show that Ra has a little,Rmax and Rz have a measurable,and the roundness error has a significant influence on the running noise.From the viewpoint of controlling bearings’running noise,raceway roundness error should be strictly controlled,and for the surface roughness parameters,Rmax and Rz should be mainly controlled.This paper proposes an effective method to obtain the low noise bearing by machining the raceway with floating abrasive polishing after super finishing. 关 键 词：表面粗糙度参数 轴承滚道 圆度误差 研磨抛光 运行噪音 后加工 浮动 表面轮廓
相关文献

参考文献(16)

引证文献(3)

网站首页 | 关于我们 | 联系我们 | 产品服务 | 客服中心 | 广告服务 | 版权声明 | 网站联盟 | 友情链接 | 售卡网点

版权所有© 渝B2-20050021-1　渝公网安备 50019002500403号　违法和不良信息举报中心

互联网出版许可证 新出网证(渝)字10号 全国400电话 - 免长途话费