维普中文期刊产品整合服务

Influence of laser surface remelting on microstructure and degradation mechanism in simulated body fluid of Zn-0.5Zr alloy

查看全文 作　　者：Zheng [1,2]Wang;Qingke [1]Zhang;Robabeh [1]Bagheri;Pushan [1]Guo;Yirong [1]Yao;Lijing [1]Yang;Zhenlun [1]Song 高影响力作者 机构地区：[1]Key Laboratory of Marine Materials and Related Technologies,Zhejiang Key Laboratory of Marine Materials and Protective Technologies,Ningbo Institute of Materials Technology and Engineering,Chinese Academy of Sciences,Ningbo 315201,China;[2]Nano Science and Technology Institute,University of Science and Technology of China,Suzhou 215123,China高影响力机构 出　　处：《Journal of Materials Science & Technology》索引2019年第35卷第11期,共9页高影响力期刊 摘　　要：In this study,the Zn-0.5 wt%Zr(Zn-Zr)alloy was treated by laser surface remelting(LSR),and then the microstructure and degradation mechanism of the remelting layer were investigated and compared with the original as-cast alloy.The results reveal that after LSR,the bulky Zn(22)Zr phase in the original Zn-Zr alloy is dissolved and the coarse equiaxed grains transform into fine dendrites with a secondary dendrite arm space of about 100 nm.During the degradation process in simulated body fluid(SBF),the corrosion products usually concentrate at some certain areas in the original alloy,while the corrosion products distribute uniformly and loosely in the LSR-treated surface.After removing the corrosion products,it was found that the former suffers obvious pitting corrosion and then localized corrosion.The proposed mechanism is that corrosion initiates at grain boundaries and develops into the depth at some locations,and then leads to localized corrosion.For the LSR-treated sample,corrosion initiates at some active sites and propagates in all directions,corrosion takes place in the whole surface with distinctly uniform thickness reduction,while the localized corrosion and peeling of bulky Zn(22)Zr particles were eliminated.The electrochemical results also suggest the uniform corrosion of LSR-treated sample and localized corrosion of original sample.Based on the results,a new approach to regulate the corrosion mode of the biodegradable Zn alloy is proposed. 关 键 词：Biodegradable Zn alloy Laser surface remelting MICROSTRUCTURE Degradation mechanism
相关文献

参考文献(36)

引证文献(1)

耦合文献(30)

网站首页 | 关于我们 | 联系我们 | 产品服务 | 客服中心 | 广告服务 | 版权声明 | 网站联盟 | 友情链接 | 售卡网点

版权所有© 渝B2-20050021-1　渝公网安备 50019002500403号　违法和不良信息举报中心

互联网出版许可证 新出网证(渝)字10号 全国400电话 - 免长途话费