|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | Study on the Bonding Performance of the Moso Bamboo Dowel Welded to a Poplar Substrate Joint by High-Speed Rotation显示文摘The wood friction welding technique with its high bonding strength,low cost,high efficiency,and without any adhesive has been increasing concern in China.Moso bamboo(Phyllostachys pubescens)and poplar(Populus sp.)are widely planted and used in the furniture industry,interior decoration,and wood structure construction in China.The aim of this work was to investigate the bonding performance of moso bamboo dowel rotation welded joints with different dowel/receiving hole diameter ratios.The results indicated that the ratio of dowel/receiving hole diameter was an important parameter that influenced the welding performance.The bonding strength of the bamboo-to-poplar welded joints at the optimal ratio of 10/7 was as high as 7.50 MPa,which was higher than that of the beech(Fagus sylvatica,L.),schima(Schima superba)dowels and PVAc glued joints.The temperature measurement results showed a peak temperature of bamboo dowel welding as high as 350–360°C.Some differences in the temperature curves between each dowel/hole diameter ratio group were observed at the three different hole depths,such as the friction time,peak temperatures,and stabilization time at the maximum temperature,which could explain the differences in welding strengths between different ratios.The SEM results showed the temperature-induced softening,melting and flowing of cell-interconnected polymer material in the wood and bamboo structure.In addition,the bamboo fibers(mainly vascular bundles)were wrapped to form a dense continuous bonding layer,similar to the reinforced concrete,thus producing a good bonding effect.The Fourier transform-infrared spectroscopy(FT-IR)analyses showed that the high temperature resulted in the increase of the lignin relative content due to the degradation reaction of cellulose in the welding zone,which improved the bonding properties. | Suxia Li Haiyang Zhang Biqing Shu Liangsong Cheng Zehui Ju Xiaoning Lu | 2021 | Journal of Renewable Materials2021，9，7： | 1 |
| 2 | Improving the Properties of Fast-Growing Chinese Fir by Vacuum Hot Pressing Treatment显示文摘Chinese fir was compressed by vacuum hot pressing and conventional hot pressing at different temperatures(180℃,200℃ and 220℃),respectively.The color parameters of the heat-compressed sample were measured,the relative mechanical properties of the material were tested and changes in the chemistry of fir were investigated using Fourier transform infrared spectroscopy(FTIR)and Xray photoelectron spectroscopy(XPS).The results indicated that the color difference between compressed and untreated wood increased gradually with the increase of temperature.Compared with the conventional hot pressing treatment,the color difference(ΔE*)of the Chinese fir treated by vacuum hot pressing decreased by 43.73%,69.91%,and 77.17%,respectively.The mechanical properties(bending elastic modulus and bending strength)of Chinese fir treated by vacuum hot pressing were significantly improved.The 24-hour water absorption thickness expansion rate of fir treated by vacuum hot pressing is smaller than that of conventional hot pressing.It is implied that vacuum hot pressing treatment is an effective method to produce compressed wood,which can improve the mechanical properties and dimensional stability of wood,and reduce the influence of carbonization on wood color. | Lu Hong Biqing Shu Qian He Zehui Ju Haiyang Zhang Xiaoning Lu | 2021 | Journal of Renewable Materials2021，9，1： | 0 |
| 3 | Hydrophobic Poplar Prepared via High Voltage Electric Field(HVEF)with Copper as Electrode Plate显示文摘In order to improve hydrophobic characteristics which will affect the service performance of fast-growing poplar due to growing bacteria in the humid environment.In this study,a simple method was proposed to treat poplar via the high voltage electric field(HVEF)with copper as the electrode plate.Scanning electron microscope(SEM),Fourier transforms infrared spectroscopy(FTIR),X-ray diffraction(XRD)and contact angle tester were adopted to evaluate the surface morphology,surface group of poplar,crystallinity and wettability under HVEF.It was found by SEM that a large number of copper particles were uniformly attached to the surface of poplar.In all three sections,the weight percentage of the Cu element was accounting for more than half.The diffraction peaks of copper-containing compounds appeared in the(XRD).FTIR analysis confirmed that the reaction between copper and poplar took place.The surface contact angle of three sections of poplar increased in the following order:cross section | Jianxin Cui Zehui Ju Lu Hong Biqing Shu Xiaoning Lu | 2022 | Journal of Renewable Materials2022，10，11： | 0 |
| 4 | Structure Design and Properties of Three-Layer Particleboard Based on High Voltage Electrostatic Field(HVEF)显示文摘In this study,the effects of three different particle sizes of wood wastes(A=–8+12 mesh;B=–12+20 mesh;C=–20+30 mesh)and factory shavings(D)on the properties of particleboard were investigated.According to the test results,three-layer particleboard was designed.Particleboard face layers made with mixture of A,B,and C.The core layer made with D.The ratio of core layer to face layers is 50:50.Three-layer particleboard were fabricated with 12%urea-formaldehyde(UF)resins and three different high voltage electrostatic field intensities(0 kv,30 kv,60 kv).The internal bond(IB)strength,modulus of rupture(MOR),modulus of elasticity(MOE),thickness swelling(TS),and water absorption(WA)of particleboard were evaluated.The density distribution of the three-layer particleboard were examined by vertical density profiles(VDP),and the bonding mechanism and functional groups changes in the particles were analyzed by FTIR analysis.The results showed that HVEF treatment intensity play a remarkable role in properties of particleboard.The particleboard with higher electrostatic field intensities treatment has higher MOE,MOR,IB,and TS.Under HVEF treatment(60 kv),the MOR,modulus of MOE,and IB of three-layer particleboard were 23.61 N/mm^(2),2787.09 N/mm^(2),and 0.86 N/mm^(2),respectively.FTIR indicated that the surface activity of wood particles was increased electric field treatment. | Man Yuan Lu Hong Zehui Ju Wenli Gu Biqing Shu Jianxin Cui Xiaoning Lu Zhiqiang Wang | 2021 | Journal of Renewable Materials2021，9，8： | 0 |
| 5 | Curing Process of Phenol Formaldehyde Resin for Plywood under Vacuum Conditions显示文摘The study characterized the curing behaviors of phenol formaldehyde(PF)resin under different vacuum degrees and explored the properties of 9-ply plywood panels hot-pressed under both vacuum and atmospheric conditions.The changes in core temperature and moisture content of the plywood mats during hot pressing were investigated as well.It was found that the gel times and gel temperatures of PF resin decreased with the increase of vacuum degree using a self-made device.FTIR spectra indicated the degree of polycondensation of hydroxymethyl gradu-ally increased with the increase in temperature.It was also observed that a higher degree of vacuum led to a slower polycondensation reaction rate of PF resin.During different hot-pressing processes,the bonding strengths in the innermost and uppermost gluelines of the vacuum hot-pressed plywood panels were up to 30%–50%higher than their counterparts of conventional hot-pressed products.A less difference in the bonding strengths between these two gluelines was also observed for vacuum hot-pressed products.In addition,the core of vacuum hot-pressed plywood was found to have a greater heating rate and higher temperature at thefinal stage of hot pressing,which was beneficial to cure the PF resin.The results from this study indicate a promising potential of introducing a vacuum during hot pressing to improve the quality and productivity of plywood products and provide a basis for adopting vacuum to hot press wood composites. | Guobing Xiong Lu Hong Zehui Ju Xiaoning Lu Juwan Jin | 2023 | Journal of Renewable Materials2023，11，9： | 0 |
| 6 | Steam Exploded Peanut Shell Fiber as the Filler in the Rigid Polyurethane Foams显示文摘In this study,steam exploded peanut shell fibers(SE-PSFs)were utilized to fabricate with rigid polyurethane foam(RPUF)in order to improve sound absorption performance and hydrothermal weather resistance.Optimized method of SE treatment,RPUF preparation and flame retardant treatment were selected to prepare SE-PSF/RPUF composites in this experiment.Physical and mechanical properties including density,water absorption capacity,thickness swelling rate,compressive strength,thermal conductivity and average sound absorption coefficient of SE-PSF/RPUF were investigated and compared with the control(PRUF).The results showed that the density,water absorption capacity,thickness swelling rate and thermal conductivity showed an increasing trend with the increase of SE-PSFs content.The strength of the composite material showed a downward trend with the increase of the SE-PSFs content.The average sound absorption coefficient of the SE-PSFs/RPUF compared with PRUF significant increased,and the average sound absorption coefficient of the SE-PSFs/RPUF with SE-PSFs 40%was 0.47.The study getted the best ratio of flame retardants for 10%EG and 3%DMMP.The oxygen index was 35.56 vol%. | Zehui Ju Qian He Tianyi Zhan Haiyang Zhang Lin Sun Lu Hong Xinyi Shi Xiaoning Lu | 2019 | Journal of Renewable Materials2019，7，11： | 0 |
您所在的机构暂未开通此部分的功能，请联系管理员